Flat Foam Boat Fender for 20' to 35' Long Boats - Qty 1

Video Transcript for Review of AO Marine Boat Bumpers - Flat Boat Fender - AM74NR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this AO Marine Flatboat Fender for 20 foot to 35 foot long boats. Now this fender here will help protect your boat's hull from damage using this 24 inch long, 12 inch wide flat foam boat fender, helps cushion impacts with any docks, mooring buoys or other boats and this fender is constructed using a dual density EVA closed cell foam. Helps prevent any water log. You can see the top and bottom section's a little bit harder foam and the inner portion is a little more spongier so you can see it does flex just a little bit, mold, puncture or deflate and this flat fender will hang from your boat to prevent damage to the hull. It can be deployed horizontally like this or you can turn it this way and deploy it vertically, whichever fits your application.

It is a nice flat design so it does prevent any rolling or riding up on your hull and this will take up less space than round fenders, making docking easier. This compact fender can be used also as a knee pad or a seat cushion and it'll easily store under the seats. You can fasten this to other fenders for a modular system using the included hook and loop strap on this end and see just by hooking it, you can hook it to another one and on this end it has these tie lines that you can use to hook them up to another fender if need be. A few specs on this, again, this is designed to work on 20 foot to 35 foot long boats. The color on this is navy blue and gray and the dimensions, again, just to show you the measurements, we go edge to edge lengthwise it's 24 inches.

The width, edge to edge, is 12 inches wide and then the height, bottom to the top's right at three inches thick. But that should do it for the review on this AO Marine Flatboat Fender for the 20 foot to 35 foot long boats.